Report
![[Laser cut and engrave] Welcome Sign - 5Weeks5Projects #2](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/cde30838-cb2b-403b-892b-f998be5ab5a3?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Welcome Sign - 5Weeks5Projects #2
InstructionWelcome Sign
.xcs
Application scenario
Laser (60min)
Machine & module
xTool S1
40WCompatibles · 8
Material used
6mm Birch Plywood
463
2471
Information
A simple, but elegant wall decoration "Welcome" sign. 3 layers, easily cut from 12" squares.
Instruction
1
Step1: Load and adjust the design.
Preview
This sign can easily be largened, if desired. Simply load into your software (I use XCS) and resize the design. There are no tabs to worry about. Everything will be resized proportionally.
2
Step2: Cut it!
Preview
When ready, load your wood, set the distance, then mark your processing area. If you wish, you can frame it. I sometimes need to worry about the honeycomb hold-downs, as they get in the way and need to be moved. When ready - process you cuts.
Load - Adjust - Cut - Repeat for each layer.
3
Step3: Glue together then Paint or Stain
Preview
Glue the three layers together, being sure they are aligned properly to show the different layers. When dry, you can stain or paint the wood to your preference.
Comments
