HomeTemplatesDecorHome Decor
jordync8915
Report
[Laser cut and engrave] Engraved ceramic coasters
Project made with xTool M1 machine for Laser cut and engrave.
[Laser cut and engrave] Engraved ceramic coasters
[Laser cut and engrave] Engraved ceramic coasters

Engraved ceramic coasters

Instruction
cowboys coasters.xcs
cowboys coasters
.xcs
Application scenario
Laser (70min)
Machine & module
xTool M1
10W
Compatibles · 5
Material used
Stone
93
1526

Information

      I bought pretty marble looking ceramic coasters on Amazon, it didn’t show up well so I did some research and used spray paint so the design would show up well.

Instruction

1

Step1: Laid all my coasters out and sprayed paint them with silver metallic paint, once first coat is fully dry, do a second coat

Engraved ceramic coasters instruction: step 1 - Laid all my coasters out and sprayed paint them with silver metallic paint, once first coat is fully dry, do a second coat
Preview
2

Step2: After 2 coats are done and fully dry, place in machine, I did power at 90% and speed at 50%

3

Step3: I used any basic clear coat sealant to keep the spray paint in place and looking pretty

Comments

Remixes

xTool Supplies Used in This Template

xTool M1
xTool M1

License

CC BY-SA