![[Laser cut and engrave] Be my valentine coffee cup](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/f97a41fe-a4c9-4823-85e9-2de8fe29efaf?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Be my valentine coffee cup
Instruction
Information
A be my valentine coffee cup made with the xtool M1 Rotary RA2.
Instruction
Step1: Soak Colored marking paper in water and slide it on the cup
Soak the marking paper in water for about 5 min. (Colored Marking Paper are in different colors) This time we used the brown/red paper.
Mark your cup with the masking tape about 2cm from the top of the cup and about 1 cm from the handle. Then slide the colored marking paper on the cup in the corner of the masking tape.
Please handle the colored marking paper with care and you have to rubb gently the foldings to the side. (the colored marking paper can break). The less foldings on the paper the better.
A note: Let the Colored marking paper dry, better result is when cup is engraved the next day. It will be darker.
Step2: Put the cup in the Rotary RA2 Pro
Clamb the cup in the chuck of the Rotary RA2 Pro. The chuck has to before the handle of the cup.
Step3: open the be my valentine xcs
When you have set all the settings. Then framing your design. Make adjustments. When you approved the framing then you can push process.
