Report
![[Laser cut and engrave] Heart Suncatdher](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/3a85b8d1-a779-42e2-aff1-a6b87e0a55c9?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Heart Suncatdher
Instructionheart suncatcher
.xcs
Application scenario
Laser (15min)
Machine & module
xTool M1
10WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
16
721
Information
Quick and easy project. Three hanging hearts with color changing insides.
Instruction
1
Step1: Cut plywood per file
Using the “Heart Suncatcher” XCS file, cut two each of three hearts. In the file, the largest and smallest hearts are nested.
2
Step2: Paint
Preview
Using whatever paint you want, paint one side of each heart.
3
Step3: Prepare the cellophane and glue it.
Preview
Using the hearts as templates, cut three cellophane hearts (one of each size.) Cut the cellophane slightly smaller than each heart's OD. Then spread a thin layer of glue to the back of the corresponding size heart. Don't worry about ripples and wrinkles in the cellophane; they make interesting light patterns.
4
Step4: Glue on other heart
Preview
Apply a thin layer of glue to the back of the second heart. Make a wood, cellophane, wood sandwich, clip together and let dry. Repeat for other two size hearts.
5
Step5: String the hearts together
Preview
After hearts are strung, hang in a sunny window.
Comments
