Report
Laser Cut Wooden House WiFi QR Code Guest Sign
InstructionWi-FiStand
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
10WCompatibles · 11
Material used
1/8"(3mm) Birch Plywood
12
174
Information
When we have a party, we always turn on our guest Wi-Fi so everyone can easily connect to the internet.
With that in mind, I've designed a little stand for you that your guests will see right when they enter the house.
I've already created the shape for you, so all you have to do is enter your Wi-Fi credentials and send it to the laser!
Instruction
1
Step1: Create a QR code with your guest Wi-Fi information
Preview
Using the XCS software, enter the information for your guest Wi-Fi.
Here's a quick guide to what each prefix in the Wi-Fi QR code string means:
WIFI:S:GUEST_WIFI_NAME;
S = The SSID (name) of your guest network.
T:WPA;
T = The security protocol of your network. (WPA and WPA2, are both are defined as WPA.)
P:SECRET_PASSWORD;;
P = The password of your network.
Don’t forget there are two semi-colons at the end here!
2
Step2: Getting Ready to Laser
Once you have your complete QR code string, simply replace the existing dummy placeholder in the design. You can then resize the QR code as you wish to fit the stand.
Always double-check that your QR code is centered before sending the job to the laser.
Enjoy your hassle-free guest Wi-Fi!
Comments
