HomeTemplatesDecorHome DecorShelves & Holders
tpleo54
Report
[Laser cut and engrave] Paint bottle holder
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Paint bottle holder
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Paint bottle holder
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Paint bottle holder
[Laser cut and engrave] Paint bottle holder
[Laser cut and engrave] Paint bottle holder
[Laser cut and engrave] Paint bottle holder
[Laser cut and engrave] Paint bottle holder
[Laser cut and engrave] Paint bottle holder

Paint bottle holder

Instruction
paintholder.xcs
paintholder
.xcs
Application scenario
Laser
Machine & module
xTool S1
40W
Compatibles · 8
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
350
2505

Information

      A simple paint holder that is stackable
The last picture is using paintholder3 file. It is also stackable just make 2 of them.

Instruction

1

Step1: Design

Design the way you want your project made. I used an online box creator then tweaked it to suit my needs. I used boxes.py to get the basic build.

2

Step2: Send to machine

Paint bottle holder instruction: step 2 - Send to machine
Preview

Don't forget to resize your tab holes if you are using a different material. If your paint bottles are a different size, you can resize the holes also.

3

Step3: Cut it all out

Paint bottle holder instruction: step 3 - Cut it all out
Preview

After cutting remove and check for fit.

4

Step4: glue and clamp

Paint bottle holder instruction: step 4 - glue and clamp
Preview

Glue it all together.

Comments

Remixes

xTool Supplies Used in This Template

xTool S1
xTool S1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
3mm Basswood Plywood

License

CC0