You can customize the text in this file if desired.  First, click on the text that you want to change.  Now, double click and you will see the text cursor.  Double click again and the entire text will be highlighted.  Type your text and change the font if desired.  You may need to adjust the size to fit in the space.  Make sure the new text is aligned in the center of the piece.  Select the text and the rectangle, then click the align button at the top.  Now, select align center.

This file has 2 canvases.  Click on Canvas1 at the top of the screen.  This will open up the canvas menu and you can choose which one you want.  This project used 3mm basswood for canvas1 and 3mm dark walnut for canvas2.  Process your material.  Clean/sand pieces if needed. 

The easiest way to assemble is to start at the bottom and work your way up.  First, glue the box together, and attach the plaque using the score line as a guide.  Next, glue the 2 base pieces onto the box using the score lines for placement.  Now, glue each leg in the slots making sure the smaller side in on the bottom.  The bottom of the cup is next.  Start with 1 slot and work your way around adjusting the legs to fit into each slot.  For the cup panels, make sure you glue the engraved piece in the front to line up with the engraved plaque.  Also, make sure the panels with the slots are on each side as shown in the picture.  Glue on all the panels.  Glue on the top of the cup the same way as the bottom.  Start with 1 slot and work your way around adjusting the panels as you go to fit into each slot.  Last, glue the handles in place.  Finish with a clear coat or polyurethane of choice.