HomeTemplatesFashion & WearablesBags & Purses
Betzy @AmorToCreate
Report
Laser cut and engrave
Project made with xTool F1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave

Customizing Bags with XCS and the Xtool F1

Instruction
bag for commuity.xcs
bag for commuity
.xcs
Application scenario
Laser (1min)
Machine & module
xTool F1
10W
Material used
3.5 mm Corrugated Paper
Paper
130
2589
Information
      Personalizing gift bags in seconds using the xTool F1. Test the settings on the bottom of the bag depending on the material. These will be a hit for party decor, engagements and special gifts.
Instruction
1
Step1: Open XCS and upload your design
  1. Open the design on XCS
  2. Make sure your design is placed correctly, I rotated it 180 based on the placement of the bagt in the machine
  3. Adjust the focus (i manually move the knob to get the blue and red dot together)
  4. Make sure your bag is completly flat and check the placement by using the frame feature of XCS
  5. Lower the machine protective shield or protect your eyes against the diode light
  6. These takes seconds to make so you are set to make so many, so fast and have a lot of fun.

Follow me here for more projects soon!

Comments
Remixes
xTool Supplies Used in This Template
xTool F1
xTool F1

License

CC BY-NC