🗼 About the Model:
This Space Needle Tower is designed for laser cutting using 3 mm plywood. It assembles into a detailed 3D architectural model of the iconic Seattle landmark—perfect for display or gifting.

Minimum Laser Bed Size: 300 mm × 300 mm
Ensure your laser cutter’s working area is at least 300×300 mm. Smaller machines may not accommodate the largest parts.
-----------------------------------------------------
📏 Model Dimensions (Assembled)
Height: 696 mm
Length: 220 mm
Width: 220 mm
------------------------------------------------
📁 Included File Formats
AI (Adobe Illustrator)
DXF (Drawing Exchange Format)
SVG (Scalable Vector Graphics)
PDF (Full assembly instructions)
------------------------------------------------------------
⚙️ Compatibility & Requirements
Material: 3 mm plywood (or laser-safe MDF)
Minimum Laser Bed: 300 × 300 mm
---------------------------------------------------------- 
📐 Scaling Instructions (for other material thicknesses)
If you plan to use different material thicknesses, scale the entire design proportionally:
For 2 mm boards: 2 ÷ 3 = 0.6667 → Scale to 66.67%
For 4 mm boards: 4 ÷ 3 = 1.3333 → Scale to 133.33%
⚠️ IMPORTANT: After scaling, your laser cutter will require a correspondingly larger working area.
At 66.67%, minimum bed size becomes approximately 200 × 146 mm.
At 133.33%, minimum bed size becomes approximately 293 × 293 mm.
Please ensure your machine’s travel matches the scaled dimensions to avoid cutting errors.