HomeTemplatesToys & Games & ModelsMazes
Ross McSweeney
Report
Laser cut and engrave
Project made with machine for Laser cut and engrave.
Project made with machine for Laser cut and engrave.
Laser cut and engrave
Project made with machine for Laser cut and engrave.
Laser cut and engrave
Project made with machine for Laser cut and engrave.
Laser cut and engrave
Project made with machine for Laser cut and engrave.
Laser cut and engrave
Project made with machine for Laser cut and engrave.
Laser cut and engrave
Project made with machine for Laser cut and engrave.
Laser cut and engrave
Project made with machine for Laser cut and engrave.
Laser cut and engrave
Project made with machine for Laser cut and engrave.
Laser cut and engrave
Project made with machine for Laser cut and engrave.
Laser cut and engrave
Project made with machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Kinetic Coasters SET 5 - Hand Spinner - Fidget Spinner - Laser Cut Files

Instruction
$ 5.00
KineticCoasterSET5-Instructions.pdf
KineticCoasterSET5-Instructions
.pdf
Redeem with500Credits
Information
      Kinetic Coasters - Set 5 - Designed by Ross McSweeney
To see a longer video of it in action! https://youtu.be/iOl_yOyB6Jw
★★READ BEFORE PURCHASING★★ 

This is a digital file. You will not receive a physical product or physical files of any sort in the mail. It will be available for instant download. The files are Zipped which will need to be unzipped on a desktop computer. 

You will need 4 sheets of cutting material and will need to be able to cut about 22cmx22cm to fit all the parts of 1 coaster on a sheet of wood/acrylic etc.
1 coaster usually takes me about 15 minutes to cut and assemble. 

There is also a tiny test cut file for each thickness. Please cut this first to make sure everything will work perfectly! It is small and quick to make.

●In the Zip folder you will find a lot of files.
★Regular SVG files. They may look like HTML files but are actually SVG files which can be read by most laser cutters and software. ★Lightburn Files (lbrn2) ★CorelDraw files (cdr) - I saved these files as a 2017 version of the software which should stop any crazy wavy lines appearing. If you need newer files let me know! ★I also have Adobe Illustrator files but they were too big for the Etsy download limit so please email me to get them.

There are 4 thicknesses to choose from. I made the most common sizes which are
★2.5mm thickness of wood.
 You will need to be able to cut 22cm x 22cm on your laser cutter.
★3mm thickness of wood.
 You will need to be able to cut 22cm x 22cm on your laser cutter.
★3.175mm (1/8th inch) thickness of wood.
 You will need to be able to cut 22cm x 22cm on your laser cutter.
★4mm thickness of wood.
 You will need to be able to cut 27cm x 27cm on your laser cutter.

The finished coasters will be 10cm x 10cm - (The 4mm coaster will be 12.5cm) 
If you cannot cut 22cm x 22cm on your laser cutter I can make you a custom file that will work for you so please send me a message after purchasing! 

★I have also included some Acrylic tops. You can either just glue a piece of acrylic on top or I have made some special pieces to hold the acrylic top on using the wooden pegs.

Feel free to email me anytime if you need help! My email is [email protected]

Please give me at least 12 hours to make up for our various time differences!

Good luck and all the best
Ross
Comments

Purchase Terms

Risk-free commercial use. Read more license.
Instant access and unlimited downloads of files after payment.
No returns/exchanges for digital items.

License

Commercial