Report
![[Laser cut and engrave] 4 leaf clover glasses](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/e6c09648-4f71-4697-aea2-ac06586ca85e?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
4 leaf clover glasses
Instructionglasses
.xcs
Application scenario
Laser
Machine & module
xTool D1 Pro
10WMaterial used
1/8"(3mm) Basswood Plywood
Transparent Acrylic
3mm Basswood Plywood
99
1182
Information
Glasses to wear on St Patty's Day. Wood and acrylic
Instruction
1
Step1: Make your design
Preview
Use different shapes and use the combine function to get the curve on the ear loops. This took quite a bit of trial and error.
2
Step2: Start processing.
These settings are for the wooden ones
3
Step3: Glue and paint
Preview
Paint the parts then glue together
4
Step4: Set design for the acrylic pair
Preview
Do the same as for the wood pair
5
Step5: process and cut
There are 2 canvases for this project. The first is the wood and canvas 2 is the acrylic. Of course, you can use either design for either material just be sure and change your settings for that material.
Comments