HomeTemplatesHome DecorClock
comp56
Report
[Laser cut and engrave] Sun Dial
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Sun Dial
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Sun Dial
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Sun Dial
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Sun Dial
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Sun Dial
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Sun Dial
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Sun Dial
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Sun Dial
[Laser cut and engrave] Sun Dial
[Laser cut and engrave] Sun Dial
[Laser cut and engrave] Sun Dial
[Laser cut and engrave] Sun Dial
[Laser cut and engrave] Sun Dial
[Laser cut and engrave] Sun Dial
[Laser cut and engrave] Sun Dial
[Laser cut and engrave] Sun Dial
[Laser cut and engrave] Sun Dial
[Laser cut and engrave] Sun Dial

Sun Dial

sun dial.xcs
sun dial
.xcs
Application scenario
Laser (25min)
Machine & module
xTool S1
20W
Compatibles · 10
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
45
546

Information

      From the power of the sun we can tell time based on it's shadow. This is a simple old school sun dial made from wood to show the time of day. For this Project I couldn't use the actual sun as it was cloudy today so I used a flash light to make up for it.
Comments

Remixes

xTool Supplies Used in This Template

xTool S1
xTool S1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
3mm Basswood Plywood