Install the pink cutting mat, paste the PU Heat Transfer Vinyl and install the point blade.Import the file into the XCS software, connect the device and adjust the pattern size according to the actual material.Then and cut the PU Heat Transfer Vinyl.

Notes

1.PU Heat Transfer Vinyl is cut from the back and then transferred print to the front, so remember choose the 【reflect】 when you cutting graphics such as text.

2.Pay attention to the cutting range, the cutting area can not exceed the scope of PU Heat Transfer Vinyl. Otherwise, it is easy to damage the bottom of the cutting mat.

Heat print transfer on the yellow cup after cutting the PU Heat Transfer Vinyl. Set the temperature is 220 ℃ and only need 20 seconds. Then you finish the work!