HomeTemplatesToys & Games & ModelsCharacters
tom.teck
Report
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Wooden toy shield customizable engraving

Instruction
Shield.xcs
Shield
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
20W
Compatibles · 8
Material used
6mm Technological Plywood
6mm Pine Plywood
Deep Brown Top Grain Cowhide Leather
47
277
Information
      Create toy shields for your kids with any emblem you can think of as an engraving
Instruction
1
Step1: Prep material

Place the plywood in the laser, make sure you have room to lower the focus. Start the process and let it run. I'll be adding the leather strap template in the future

Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1
6mm Technological Plywood
6mm Technological Plywood
6mm Pine Plywood
6mm Pine Plywood
Deep Brown Top Grain Cowhide Leather
Deep Brown Top Grain Cowhide Leather

License

Standard License