![[Laser cut and engrave] How to engrave a simple Dog tag with S1](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/2f1c76b9-e5a2-49a6-a7a9-eb84db0d31fc?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
How to engrave a simple Dog tag with S1
Instruction
Information
Easy peasy - this is the best project to start with if you want to be 100% successful on your first try
Instruction
Step1: Place your tag on the xtool s1
put your tag on the machine and move your laser so that the cross hairs show on top of the materials.
Step2
Create the name you want for your dog tag using the text tool on the left hand side.
Step3
set your markings using the set markings button. Be sure to select the right size from the menu and use the button on your machine (the cut button) to mark each marking point. Once you have finished making your markings. click done.
Step4
Add text to your boundary (created by your marking) Use the text tool and change the text font and size. Move the text so that it sits inside the boundary you created in you marking step
Step5
Click Framing. Do this twice to make sure that your project is appropriately framed. Youll need to use your cut button your machine each time you set your framing. Once you have your framing completed (2nd time completed), click Framing completed.
Step6
Click start in the upper right hand corner to engrave your tag. After you press this button you will have to press the button on your machine.