Report
![[Laser cut and engrave] 2x6 Box with Lid](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/8f3b1266-56d9-4eca-81de-1621f08f6b80?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
2x6 Box with Lid
Instruction2x6box_with_lid
.svg
Application scenario
Laser (45min)
Machine & module
xTool M1
10WMaterial used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
655
4837
Information
Small 2in wide x 6in long trinket/pencil/whatever box with layered lid- stays in place.
Instruction
1
Step1: Cut Sides & Bottom
Preview
This will require one 12x8 piece of basswood, 3mm. In the file, these peices are layered in black. They are fit together so you should be able to select whole group and cut. My settings are 5 speed and 96 power.
During this step, set other two layers to ignore. if using 12x8 sheet of basswood.
2
Step2: Cut Top Pieces
There are two pieces involved here, they can be cut on trim wood. Hide the black group, and ensure your set to not ignore the black this time (previously ignore the other two layers).
The top piece with the wording will be glued to the bottom scored peice- line up your leaves so they show a little before gluing. Ensure your bottom piece for the lid is centered on the top lid piece.
Dry both the box and lid. Ta-Da! Youre done.
Comments