Report
Extra Large 3D Print Testing card for testing Fiber Laser engraving
Remix
Instruction180mmx180mmLargeMaterialTester
.xcs
Application scenario
Laser processing
Machine & module
xTool F1 Ultra
20WMaterial used
2 mm 3d Print Material
46
567
Information
XL 180 mm x 180 mm Fiber Laser Test file
3d Print file can be found here https://makerworld.com/en/models/1309845-180-mm-x-180-mm-xtool-laser-test-card#profileId-1343913
This is a modification of Batch Reach Labs (https://www.youtube.com/@batchresearchlab) laser engraving test. It was added to and modified for more settings in a single test
Full credit goes to Batch Reach Labs for creating a great engraving test file which I added some things to. Thank Batch Reach Labs
The original file is found here https://www.batchmade.studio/f1-ultra-marking-settings
This remix is based on
F1 Ultra Marking Settings — Batch Studio
https://www.batchmade.studio/f1-ultra-marking-settingsInstruction
1
Step1
Download the 3d print file and print it
https://makerworld.com/en/models/1309845-180-mm-x-180-mm-xtool-laser-test-card#profileId-1343913
2
Step2
Place the print on the work surface and line it up
3
Step3
In the top right-hand corner, change the material to whatever you are using for easier tracking
4
Step4
Run the file once on the 3d print
5
Step5
Flip the 3d print to the opposite side and line it up
6
Step6
Run the file on the 3d print for a second time
7
Step7
Enjoy the markings giving you examples for top and bottom surfaces of 3d prints and other materials
Comments
Remixes
xTool Supplies Used in This Template