Report
Stainless Steel Metal Sign Cutting
Instruction2mmStainlessSteelMetalSign(StandardNozzle)
.xcs
Application scenario
Laser welding / cleaning (35min)
Machine & module
xTool MetalFab
1200WMaterial used
1/12''(2mm) Stainless Steel * 1pcs
125
1373
Information
Create stunning personalized metal signs with xTool MetalFab Laser Welder & CNC Cutter! Our advanced cutting technology produces incredibly detailed designs. With our easy-to-use template, you can simply modify the name to make it uniquely yours. Perfect for enhancing your home decor or for resale, these custom signs are a fantastic way to showcase your style. Start crafting your masterpiece today!
Instruction
1
Step1: Connect the machine, place the material
Preview
Preview
- Open and connect the welding machine to the cutting platform, then plug on, turn on the gas(nitrogen cylinder of 174 PSI/1.2 MPa shown in XCS when processing).
- Place a 24''x 24''(610 x 610 mm) sheet on the cutting platform and secure it with the blade and clamps.
2
Step2: Insert the XCS file
Preview
Preview
Turn on the machine, open xTool Creative Space on the computer, drag in the required xcs file, and adjust the parameters.
- Adjust the following height
- Adjust the parameters
Parameters for 1/8'' (3mm) Stainless Steel：
Standard Nozzle+High Pressure（174 PSI/1.2MPa shown in XCS when processing）
3
Step3: Calibrate the capacitive sensor
Preview
Click the start calibration button and then click on the center area of the material image to perform calibration.
4
Step4: Framing and Processing
Preview
- Click the "Framing" to confirm that it is within the processing range. If there are no issues, close the lid, click "Process" and press the "Start" button of the cutting platform.
- Use a rubber mallet to knock off any remaining debris, then spray paint evenly.
- Hang the sign using a rope.
5
Step5: Must-know Suggestions
- When cutting, select the correct combination of cutting nozzle and gas: use a standard nozzle with a nitrogen cylinder or a large compressor (pressure must reach 174 PSI/1.2 MPa shown in XCS software when processing)
- It is recommended to conduct a small-scale test before cutting and welding to confirm the results before proceeding with further processing.
Comments
Remixes
xTool Supplies Used in This Template