HomeTemplatesDecorHome DecorShelves & Holders
Ondrashek
Report
Laser cut and engrave
Project made with xTool M1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave

2023 to 2024 stand

Instruction
2023to2024.xcs
2023to2024
.xcs
Application scenario
Laser
Machine & module
xTool M1
10W
Compatibles · 7
Material used
Poplar Plywood
53
875
Information
      Changeable new year stand. You can cut every year a new number to replace it and keep original stand
Instruction
1
Step1: Insert Text with numbers 202 and 3 and 4
Preview
Preview

Insert 3x Text with number 202 and 3 and 4. Make sure all numbers have same height. After that you should Align all numbers Vertically. 

2
Step2: Insert Rectangles
Preview
Preview

Insert 3x rectangles below numbers as plug to stand. Be careful: The height of rectangles is material thickness!

3
Step3: Copy 2x rectangles -> Paste and add Circle as stand
Preview
Preview

Select 2x rectangles under 202 and 3 numbers and Copy. Paste in different place and move it down. Insert Circle and make stand from pasted rectangles and a new circle shape. 

4
Step4: Select Numbers with Rectangles plug and Unite
Preview
Preview

Select numbers 202 3 4 with under rectangles and Unite. You can Unite it separately to have control for each number.

Your new year stand is Done :-)

For 4mm Poplar Plywood I used: 100%power|4mm/s speed and 1 pass with Air Assist ON for cutting  

Comments
Remixes
xTool Supplies Used in This Template
xTool M1
xTool M1
Poplar Plywood
Poplar Plywood

License

CC BY-NC-SA