HomeTemplatesToys & Games & ModelsBoard Games
aidenm
Report
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave

Wooden Coin Hole Board

Instruction
coinholeboard.xcs
coinholeboard
.xcs
Application scenario
Laser processing
Machine & module
xTool D1 Pro
20W
Compatibles · 10
Material used
3mm Basswood Plywood
46
286
Information
      This wooden coin hole board is played just like regular corn hole except for that you use a coin instead of a beanbag. The board is about 65mmx120mm.
Instruction
1
Step1: Cut It Out
Preview

Cut the file out

2
Step2: Assemble the board
Preview
Preview

Press the triangle piece into the slots in the board with the larger side of the triangle towards the cutout circle as shown in the picture. Then do the same with the second side as shown in the second picture. Then repeat for the second board.

3
Step3: Finished
Preview

Your coin hole board is now finished. Enjoy!

Comments
Remixes
xTool Supplies Used in This Template
xTool D1 Pro
xTool D1 Pro
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY