![[Laser cut and engrave] Key holder with shelf](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/9f9473c0-32f4-4af4-a969-a9ed14964d11?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Key holder with shelf
Instruction
Information
A wall mounted key holder for up to four keys. It also includes a small shelf on top for sunglasses, wallet or similar.
You can glue it, hang it or attach with screws.
Instruction
Step1: Prepare parts
To make this project, you will need:
- laser cut parts
- glue
- tape (rubber bands could also work)
For mounting, you will need strong double sided tape, string or screws. Depending on how you want to attach it.
Step2: Glue the shelf bottom
Add glue to the back side as in the picture.
Add the bottom shelf part. This is the second largest piece you have.
Use tape to hold it in place.
Step3: Glue the shelf sides
Apply glue as shown in the picture. You can also apply it to the side part, where it will make contact with the assembly.
Be careful as the side parts are not symmetrical and will fit only one way.
Add the side part and use tape to hold it in place.
Repeat for the other side.
Step4: Glue the shelf front
Add glue as shown in the picture.
Attach the front shelf part.
Use tape to hold everything together. At this point you can reposition the tape to squeeze the shelf parts together.
Step5: Attach key hangers
While the glue is curing, you can also glue on the key hangers.
Apply glue to the hanger parts as shown and insert them in to the back part, under the shelf.
Attach all four hangers.
Step6: Finish up
Once the glue has fully cured, you can remove the tape and mount the key holder.
