HomeTemplatesDecorHome DecorShelves & Holders
serina
Report
Laser cut and engrave
Project made with xTool D1 machine for Winter.
Project made with xTool D1 machine for Winter.
Laser cut and engrave
Project made with xTool D1 machine for Winter.
Laser cut and engrave
Project made with xTool D1 machine for Winter.
Laser cut and engrave
Project made with xTool D1 machine for Winter.
Laser cut and engrave
Project made with xTool D1 machine for Winter.
Laser cut and engrave
Project made with xTool D1 machine for Winter.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Winter Book Ends

Instruction
winter book end.xcs
winter book end
.xcs
Application scenario
Laser (1min)
Machine & module
xTool D1
5W
Compatibles · 9
Material used
3mm Basswood Plywood
141
1298
Information
      A cute quiet wintery scene to showcase your books amongst the rest of your winter decor.
Instruction
1
Step1: Select your material and cut out your pieces
Preview

Place your wood so the grain is horizontal, spanning from left to right. 

Setting 1 - used for outlines of all objects

Setting 2 - used for all images

2
Step2: Punch out each object and glue pieces together
Preview
Preview

If you wish to paint any piece, do so prior to gluing.

 

When gluing each piece together be sure to apply some pressure for a few seconds until the pieces stay on their own.

Place items on waxed parchment paper to ensure they are not glued to an unwanted surface. 

Each item punched out that has two pegs has a specific place to go - be sure to test placement of each object prior to gluing. 

3
Step3: Place!
Preview
Preview

If you wish to add a grippy shelf/drawer liner do so on the bottom of each piece. 

Otherwise, these are done and ready for placing!

Comments
Remixes
xTool Supplies Used in This Template
xTool D1
xTool D1
3mm Basswood Plywood
3mm Basswood Plywood