HomeTemplatesDecorHome DecorWall Art
Kiouki
Report
Laser cut and engrave,Blade cut Colorful stained glass bird art piece with vibrant geometric patterns
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Laser cut and engrave,Blade cut Colorful stained glass bird art piece with vibrant geometric patterns
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Laser cut and engrave,Blade cut Colorful stained glass bird art piece with vibrant geometric patterns
Laser cut and engrave,Blade cut Colorful stained glass bird art piece with vibrant geometric patterns
Laser cut and engrave,Blade cut Colorful stained glass bird art piece with vibrant geometric patterns
Laser cut and engrave,Blade cut Colorful stained glass bird art piece with vibrant geometric patterns
Laser cut and engrave,Blade cut Colorful stained glass bird art piece with vibrant geometric patterns

Stained Glass Bird - Remix

Remix
Instruction
Stainedglassbird-remix.xcs
Stainedglassbird-remix
.xcs
Application scenario
Laser processing、Blade cut (240min)
Machine & module
xTool M1 Ultra
20W
Material used
3mm Basswood Plywood
film
23
391
Information
      This is a remix of the Stained Glass Bird by comp56 I made for the BETT2025 exhibition in London. 

I slightly changed the design to be able to glue the cuts to the plywood.

This remix is based on

atomm-remix-cover
Stained Glass Birdie
comp56
Instruction
1
Step1: Lasercut the plywood

Lasercut the plywood. You might want to cut 2 samples, with the 2nd one being mirrored for adding it to the back.

(Before lasercutting the plywood you can add a very thin layer of double sided tape to the plywood. This will make it easier to glue the film to the plywood without having drops of glue being visible).

2
Step2: Cut the film

Switch to bladecut and cut the film. I used 4 different colors for this project.

3
Step3: Glue the film to the back of the plywood

If you used double sided tape, peel off the cover first, then place the film parts into the fitting cut-outs.

Comments
Remixes
xTool Supplies Used in This Template
xTool M1 Ultra
xTool M1 Ultra
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC-ND
This work contains AI-generated content.