ERALabs
Report

Wooden Cart With Spinning Wheels

Instruction
wooden_cart.xcs
wooden_cart
.xcs
Application scenario
Laser processing
Machine & module
xTool D1 Pro
10W
Compatibles · 10
Material used
3mm Basswood Plywood
87
385
Information
      A wooden cart decoration. It features spinning wheels so can double as a toy as well.
Put in some straw and eggs and it makes for a nice Easter decorative piece.
    
Instruction
1
Step1: Prepare the parts
Preview

To make this project, you need:

  • laser cut parts
  • glue
  • tape
2
Step2: Assemble the cart
Preview
Preview
Preview
Preview

Apply glue to the base and sides as shown in the pictures.

Place the sides in to the base. You can also glue the sides to each other for better strength.

Tape the parts together and wait for the glue to cure.

3
Step3: Install the axle brackets
Preview
Preview

Apply glue to the axle brackets.

Glue them on the bottom of the base. Make sure they are well aligned so the wheels will be able to spin.

4
Step4: Add the axle
Preview
Preview
Preview

Put one half of the axle through the bracket.

Add glue as shown in the picture.

Slide on the other side of the axle. Make sure they are aligned so the wheels will be able to spin. Also make sure you don't glue the axle to the bracket.

5
Step5: Add the wheels
Preview
Preview

Apply glue to the axle ends.

Add the wheels.

Align the wheels so they are parallel.

6
Step6: Decorate
Preview

Once the glue is fully cured, you can add some decorations or paint the cart.

Comments
Remixes
xTool Supplies Used in This Template
xTool D1 Pro
xTool D1 Pro
3mm Basswood Plywood
3mm Basswood Plywood