![[Laser cut and engrave] Happy Easter Money Card/Holder | Bunny & Egg cutouts](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/228791c7-8b0f-482d-97b3-311e25605294?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Happy Easter Money Card/Holder | Bunny & Egg cutouts
Instruction
Information
Create your own money card or money holder for your easter gift - three different motives to choose from or align.
Instruction
Step1: XCS file
Open the “.xcs” file in xTool Creative Space. There is only one workspace which contains all three designs and a backplate.
Step2: Laser cut
Place your material in your device and adjust your cutting settings based on the material and device used.
For my 20W M1 Ultra in combination with 4mm poplar plywood, I used a power setting of 85 and a speed of 5 for cutting.
And a power setting of 70 and speed of 270 for engraving the outlines.
Material
- 4mm Poplar plywood [Hornbach.de, Amazon.de*]
Step3: Score
For a cleaner look and shaper text you might always want to add a scoring at the outer layer. This will make your outlines pop!
For my 20W M1 Ultra in combination with 4mm poplar plywood, I used a scoring power setting of 85 and a speed of 200.
Step4: Preparation
Place some money in between the foreground and backplate. Folding it in halfs to make two colored designs.
As a bonus, the cutout bunny can be used as an additional design for eastern.
All links with an asterisk (*) are so-called affiliate links.
I participate in the Amazon Affiliate Partner Program, which allows a small commission on purchases made if you follow the links - no additional costs are involved for you!
