Report
![[Laser cut and engrave] New Year ornament](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/00e31725-4bde-4e53-9f00-ba928f24ddd1?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
New Year ornament
Instruction2024
.xcs
Application scenario
Laser
Machine & module
xTool D1 Pro
10WMaterial used
1/8"(3mm) Basswood Plywood
Transparent Acrylic
3mm Basswood Plywood
21
682
Information
New Year ornaments made from wood and acrylic using only xcs software.
Instruction
1
Step1: Open up xcs software and use the text button to write what you want.
After you have input what you want on the screen go to outline and click it. repeat the outline as many times that you want. Then on the last outline increase the spacing to give your project a good cut line.
2
Step2: Prepare your material.
Put which material you are using in your machine and set focus.
3
Step3: I set each outline 20% less power but you can try different settings. Of course set your last outline to what your machine needs to make a clean cut
Preview
The red acrylic scores and engraves good but it is very hard to cut with 10watt diode
Comments