HomeTemplatesDecorSeasonal & Themes DecorHolidays Decor
glowbugtn
Report
Laser cut and engrave
Project made with xTool F1 machine for Christmas.
Laser cut and engrave
Laser cut and engrave

Tiny Christmas Baubles

Instruction
snowflake-25mm.xcs
snowflake-25mm
.xcs
Application scenario
Laser (10min)
Machine & module
xTool F1
Compatibles · 5
Material used
Glass
344
3164
Information
      I needed a few quick last-minute gifts for the office. These tiny baubles are vector engraved and filled with a few drops of acrylic paint to coat the interior.
Instruction
1
Step1: measure bauble

Use calipers to ensure size.

2
Step2: insert into rotary chuck

Gently remove the cap from the bauble, and insert the ornament carefully into the rotary attachment. Check focus. 

3
Step3: frame and engrave

frame to check placement. engrave with IR 85%/400 speed/300lpi

4
Step4: fill with paint

Put a couple of drops of acrylic paint inside. It may help to add a few drops of water to thin so it coats evenly.

5
Step5: drain and dry

Turn upside down to allow extra paint to drain out. Let dry. Replace the cap and enjoy!

Comments
Remixes
xTool Supplies Used in This Template
xTool F1
xTool F1