Report
![[Laser cut and engrave] Wooden calendar puzzle with date April 29](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/a233f1c9-0d88-4669-9426-6ea9c1fc1a72?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Wooden Perpetual Calendar Puzzle
InstructionCalendar
.xcs
Application scenario
Laser processing
Machine & module
xTool P2S
55W
xTool D1 Pro
10W
xTool M1
10W
xTool S1
10WCompatibles · 10
Material used
3mm Basswood Plywood
37
464
Information
My wife really likes puzzles so I made this for her. If you are brave enough, you can try to solve it for yourself. A little distraction every day.
Instruction
1
Step1: Process the file as layed out in the project
The file is designed to fit on a 12x12 sheet of wood, so the project can be done in one run. There are no requirements to the thickness of the wood. On thinner wood (1/16) I find it better to rotate the top layer 90 degrees so that the wood grain on each layer run in different directions.
2
Step2: Stain the top layer and the puzzle pieces
Staining the top layer and puzzle pieces will add contrast to the finished product.
3
Step3: Glue together
Glue the back piece (with numbers) to the top layer (frame) together. Make sure the top layer does not cover any of the months or days.
4
Step4: Stuck (Spoiler)
If you have any issues you can find daily solutions by searching for “daily calendar puzzle”.
Comments
