Halloween Pumpkin Notch

Import designing documentsImport designing documents and verify the size,processing position and processing mode.Attention:The documents of pictures are designed with 3mm walnut plywood and pvc film stickers. If the types and thickness of materials you choose are different from that, please adjust the laser processing parameters according to the actual material.

Laser processingPut the walnut plywood and the pvc film sticker in the laser device one by one and fix their space processing area with adhesive tape and other materials to achieve good results. Then，cut the walnut plywood and the pvc film sticker by laser and blade respectively.

Assemble the pumpkin headFind the parts of the pumpkin head and glue them with carpenter's glue, and then glue the pvc sticker films in order from the bottom to the top, using auxiliary materials such as superglue if necessary.Attention:Because the pumpkin part is hollow design, when pasting the self-adhesive craft vinyl on both sides, an extra piece like black flexible material can be added, such as double-sided black cardboard.

Assemble the baseIn this projext, we use a plastic ball with nails or a bouncy ball as a counterweight for the bottom of the notch, and then the assemble bottom structural in turn around the ball.Attention:When assembling the substructure, the counterweight ball should be placed with one side piece firstly. then we put 4 round piece of different sizes one by one. After that, please use 2-3 side pieces continue to installed for adjustment and after the curvature matches, installing the rest side pieces.

Install the head with the baseGlue the head with the base. A interesting pumpkin notch, success!