HomeTemplatesDecorHome Decor
BVP-3D
Report
Laser cut and engrave
Project made with xTool P2S machine for Laser cut and engrave.
Project made with xTool P2S machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool P2S machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool P2S machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool P2S machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool P2S machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool P2S machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Wine glasses with thank you for obtaining a driving license

Instruction
Rijbewijsgehaald.xcs
Rijbewijsgehaald
.xcs
Application scenario
Laser processing
Machine & module
xTool P2S
55W
Material used
Cheap wine glasses 38CL
tissues
water
37
511
Information
      Because the driving license has been obtained, we wanted to give a personal present to the driving instructor. That is why I designed 2 cars (1 driving school car and 1 regular car. with letters as a toast to obtaining a driving license in Dutch language) and engraved these wine glasses. This way you have something nice and special. The wine glasses are cheap (3 euros per set of 3 glasses)
Instruction
1
Step1
  1. Clean the wine glass. 
2
Step2
  1. Place a tissue on the glass and sprinkle it with water
  2. Make sure there is no air between the glass and the wet tissue.
3
Step3
  1. Clamp the glass with the foot in the rottory. If everything is fine, you do not need  a support from another accessory across the glass.
  2. Let the machine create a curved profile using the rottory and xcs
4
Step4
  1. Align the images and text with the frame profile in xcs.
  2. Start the engraving process.
    1. PLEASE NOTE!
      Due to the use of cheap wine glasses, they can easily crack. That is why we have added an extra step. see stap 5
5
Step5: Due to the use of cheap wine glasses, they can easily crack. That is why we have added an extra step.
  1. As soon as the laser starts on the cars, pause the machine and moisten the tissue again. (Be careful not to move/change either the laser head or the rotor or the glass.
  2. After that stap, resume the engraving process.
6
Step6: Almost Finisehd
  1. Once the machine is ready, wait 2 minutes and you can remove the remains of the tissue under the tap with water.


Done! You have something unique to gif as “thanks”for your driving instructor.

Comments
Remixes
xTool Supplies Used in This Template
xTool P2S
xTool P2S

License

CC BY