![[Laser cut and engrave] Washington,DC license plate Faux leather patch](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/bb2ec3ea-6961-494c-8018-522bf3371ed7?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Washington,DC license plate Faux leather patch
Instruction
Information
DC! Represent! Show off with a personalized faux leather patch. Add to your hats, jackets, backpacks. Your imagination is your only limit.
This design requires one additional font to be installed. Please see Instructions.
Instruction
Step1: Prepare the patch
Prepare the patch by ensuring it is free of debris. Wipe it down with a damp (not wet) towel and allow to dry completely. Isopropyl alcohol can also be used, as it will dry quickly.
Place the prepared patch on the center of your laser bed.
Step2: Customize the XCS file
Download the font: License Plate USA from https://www.dafont.com/license-plate-usa.font
Open the file in XCS.
Customize the text to fit the size and shape of your patch.
Step3: Process the XCS file
Select Framing to ensure fit and positioning.
Select Process. The patch should finish in less than 2 minutes.
Step4: Cleaning
Using a damp (not wet) cloth, wipe any char present from the patch.
Step5: Apply the patch
Be sure to follow the manufacturer's heating directions for applying the patch.
Heat press: Preheat the heat press to 360 degrees F. place the path on the desired location. Cover with a sheet of parchment paper. Press for 20 seconds.
Household Iron: Set iron to Cotton. Do not apply steam! Cover with a sheet of parchment paper. Press for 30 seconds.
