HomeTemplatesDecorHome DecorLighting
Super Simple DIY
Report
Laser cut and engrave
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Easter Egg Decoration

Instruction
EasterEggNightLight.xcs
EasterEggNightLight
.xcs
Application scenario
Laser processing (10min)
Machine & module
xTool M1 Ultra
10W
Compatibles · 10
Material used
3mm Basswood Plywood
177
1631
Information
      This super neat easter themed night light or desk decoration is meant to spark curiosity. The light was designed for excellent looks during the day and at night. You can use SVG file to cut it out of wood or make it from any other material you want. 

See end of video for really neat examples of what it looks like when done. 

Get this now for free before it becomes a premium Project in April. ENJOY!!
Instruction
1
Step1: Scoring of Assembly Guides

Please see video for scoring process. I added guide lines in design to help you assemble. Remove this setting if you want to save time. 

2
Step2: Engraving of Cross Design
Preview

Please see video for engraving process. Although on mine i “Traced” image using centerline tracing and then scored tracing to make really pop out as you can see in picture. Otherwise engrave using this setting if you want to save a minute or 2. 

3
Step3: Laser cutting of all shapes
Preview

Please see video for instructions on what pieces you will keep as well as photo attached once they are cut. Modify settings accordingly to match your material.

4
Step4: Assembly of Decoration

Please see video for entire assembly process as well as tips and examples of use. It should be straightforward but guide will help make this process a breeze. 

Comments
Remixes
xTool Supplies Used in This Template
xTool M1 Ultra
xTool M1 Ultra
3mm Basswood Plywood
3mm Basswood Plywood

License

Standard License