HomeTemplatesDecorSeasonal & Themes DecorHolidays Decor
Foiled Duck
Report
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Santa Letter Envelope

Instruction
santa letter by FoiledDuck.xcs
santa letter by FoiledDuck
.xcs
Application scenario
Laser (45min)
Machine & module
xTool S1
20W
Compatibles · 9
Material used
3mm Basswood Plywood
157
1061
Information
      This design is a perfect keepsake for your little family members.
Instruction
1
Step1: Download file
Preview

Please download and open file to XCS

2
Step2: Add wood
Preview

Add your wood to your machine

 

Make sure you find the distance and you mark your work area for this project 

3
Step3: Settings
Preview
Preview

These are the settings i usually use, please be sure to run a material test and choose the settings that best fit you.

4
Step4: Change the name
Preview

Be sure to change the name that is in the purple layer 

 

you can also take out the magnet holes if you plan on not using them 

5
Step5: time to cut
Preview

After you have set the settings to the right settings it is time to cut

6
Step6: Glue time
Preview

this step is optional if you did not keep the magnet holes 

 

 

take your 3x3mm magnets and glue and place magnets in the holes so they click together.

Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1
3mm Basswood Plywood
3mm Basswood Plywood