Report
Wooden engraved map of Australia with state names
InstructionAustraliamap
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
20WCompatibles · 8
Material used
3mm Pine Plywood
3mm Basswood Plywood
31
417
Information
Wooden map of Australia made of 2 layers of plywood, with each individual state all glued onto a backing board. 30 cms high and 32 cms wide.
Instruction
1
Step1: Cut Base piece and engrave state lines
Preview
Using 1 piece of plywood score the states on the plywood and then cut out the perimeter of the map as per the settings.
You may need to adjust the settings accordingly for the type of plywood or other material you use.
2
Step2: Cut out seperate states
Preview
On a second piece of plywood, engrave the names on each state and then cut each state out of the same plywood.
You may need to adjust the settings accordingly for the type of plywood or other material you use.
3
Step3: Paint / Stain and Assemble
Once all your pieces have been cut out you can paint or stain the backing piece and the states to your liking.
Once your pieces are dry you can glue each state onto the backing piece using the score marks for the states as a guide.
Comments
Remixes
xTool Supplies Used in This Template