HomeTemplatesDecorHome DecorLighting
jryanramer
Report
Laser cut and engrave Intricately designed wooden lantern with geometric patterns
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave Intricately designed wooden lantern with geometric patterns
Laser cut and engrave Intricately designed wooden lantern with geometric patterns
Laser cut and engrave Intricately designed wooden lantern with geometric patterns
Laser cut and engrave Intricately designed wooden lantern with geometric patterns

Decorative Japanese Wood Lantern

Lantern.xcs
Lantern
.xcs
Application scenario
Laser processing (600min)
Machine & module
xTool S1
10W
Accessories
xTool S1 Honeycomb Panel
xTool S1 Riser Base
Material used
3mm Chipboard
3mm Basswood Plywood
31
375
Information
      I made this lantern on my S1 using 3mm chipboard. With my 10W laser I had to run it at 100% power, 7mm/s and lower the focus by 6. It took about 17 minutes to fully process. The dimension are about 4.5x4x4 inches.
Comments
Remixes
xTool Supplies Used in This Template
xTool S1 Honeycomb Panel
xTool S1 Honeycomb Panel
xTool S1 Riser Base
xTool S1 Riser Base
xTool S1
xTool S1
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC-ND