HomeTemplatesDecorHome DecorWall Art
Bri
Report
Laser cut and engrave
Project made with xTool P2S machine for Laser cut and engrave.
Project made with xTool P2S machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

A bee on a elastic thread

Instruction
BrizDesignBeeStained.xcs
BrizDesignBeeStained
.xcs
Application scenario
Laser processing (10min)
Machine & module
xTool P2S
55W
Compatibles · 1
Material used
3mm Glitter Translucent Acrylic
3mm Black Opaque Glossy Acrylic
Yellow Opaque Glossy Acrylic
67
454
Information
      I made a bee from acrylic with one of the shapes in XCS.
Instruction
1
Step1: Cut acrylic
Preview

Used the bee in the shapes from XCS with a offset of .5

Made a small hole in the head for a string.

Cut out the whole bee - color: black acrylic.

2
Step2: Wings and body
Preview
Preview

Then took the wings and cut with a kerf of 0.9mm from glitter

Same for the body stripes in yellow

3
Step3: Finish your bee

Put the wings and stripes in the bee.

Use glue if it isn't a snug fit :)

Take a piece of string and hang it in the sun, and see him shine :D

Comments
Remixes
xTool Supplies Used in This Template
xTool P2S
xTool P2S
3mm Glitter Translucent Acrylic
3mm Glitter Translucent Acrylic
3mm Black Opaque Glossy Acrylic
3mm Black Opaque Glossy Acrylic
Yellow Opaque Glossy Acrylic
Yellow Opaque Glossy Acrylic

License

CC BY