HomeTemplatesDecorHome DecorWall Art
sainsburynathan
Report
[Laser cut and engrave] Wooden cross decoration on hill design
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Project made with xTool M1 Ultra machine for Laser cut and engrave.
[Laser cut and engrave] Wooden cross decoration on hill design
[Laser cut and engrave] Wooden cross decoration on hill design
[Laser cut and engrave] Wooden cross decoration on hill design
[Laser cut and engrave] Wooden cross decoration on hill design

Wooden cross decoration on hill design

Instruction
Crossonahill.xcs
Crossonahill
.xcs
Application scenario
Laser processing (5min)
Machine & module
xTool M1 Ultra
10W
Compatibles · 11
Material used
1/8"(3mm) Basswood Plywood
7
212

Information

      This image was created by AI for another project i was trying, but i cropped the other section as i liked this hill design just as it is.

I used 3mm Plywood for this project on a M1 Ultra 10w with air assist.

You could use the design for a magnet or add it onto another design of your choosing! :)

Instruction

1

Step1

Place a piece of 3mm Plywood onto your machines engraving area (Or whichever size piece you are using).

2

Step2

Measure size of desired cutout and adjust to fit in Xtool.

3

Step3

Use provided settings or choose your custom settings.

4

Step4

Select framing and check your laser is going to work in the correct location.

5

Step5

Click process, then start and push whichever button activates your laser.

6

Step6

Your all done! Congrats.

Comments

Remixes

xTool Supplies Used in This Template

xTool M1 Ultra
xTool M1 Ultra
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood

License

CC0
This work contains AI-generated content.