HomeTemplatesMiniaturesArchitecture
natsuka830
Report
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

My Dream Tree House

Instruction
0304miniatur_house.xcs
0304miniatur_house
.xcs
Application scenario
Laser processing (60min)
Machine & module
xTool S1
40W
Compatibles · 10
Material used
3mm Basswood Plywood
691
6088
Information
      I've always dreamed about living in the tree house. The real one looked like a bit difficult to get, so I made it. Thanks to Xtool,  finally my dream came true.(in 1/100 scale!)
You just need one A4 size 3mm plywood to make it. Entire design fits in it.

Finished Dimentions
- House  W76mm H85mm D85mm
- Ladder W19mm H128mm D3mm
Instruction
1
Step1
Preview

Download SVG file and load to Xtool Creative Space.

 

2
Step2
Preview

Cut and with the laser cutter.

3
Step3

Assemble all the parts with the glue. I colored them with a water-base paint , but it's optional:)

Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC-ND