HomeTemplatesDecorHome DecorWall Art
zzf3d3zz
Report
Laser cut and engrave Handcrafted Wooden Charizard Pokémon Card with 150 HP
Project made with xTool F1 machine for Laser cut and engrave.
Laser cut and engrave Handcrafted Wooden Charizard Pokémon Card with 150 HP
Laser cut and engrave Handcrafted Wooden Charizard Pokémon Card with 150 HP

Wooden Charizard Pokémon Card

Instruction
CHARIZARD.xcs
CHARIZARD
.xcs
Application scenario
Laser processing (20min)
Machine & module
xTool F1
2W, 10W
Compatibles · 9
Material used
3mm Basswood Plywood
338
1313
Information
      I designed and laser-engraved this 3D Charizard card, turning a legendary Pokémon into a unique wooden creation for all the fans and collectors out there.
Instruction
1
Step1: how to do layer art Charizard, Back
Preview

First, you need to cut out and engrave the back of the Pokémon card.

2
Step2: Front
Preview

Next, you need to cut and engrave the front of the card onto another piece of basswood. 

3
Step3: Glue step
Preview

At this point, after cutting and engraving the back of the card, cutting the front, and engraving the front, we can glue the front and back together and remove the excess wood pieces inside the card’s frame, leaving only the Pokémon and the fire coming out of its mouth. Once they are glued with wood glue, they need to dry for about an hour to get the finished result. Applying a clear varnish to enhance the details is optional.

Comments
Remixes
xTool Supplies Used in This Template
xTool F1
xTool F1
3mm Basswood Plywood
3mm Basswood Plywood

License

Standard License