Report
![[Laser cut and engrave] DIY wooden airplane model kit assembly](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/9bf9b55f-5b56-4509-a800-230e7f312a49?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Piper Cherokee airplane model
Instruction2mmPiperCherokee
.svg
Show 1 more
Application scenario
Laser processing
Machine & module
xTool M1
10W
xTool S1
10W, 20W, 40W
xTool P2
55W
xTool D1
10W, 20WMaterial used
2mm cardboard
2mm plywood
3mm cardboard
3mm plywood
111
523
Information
Very simple airplane model. It will hang level from the built in loop.
Files included for both 2mm and 3mm stock
Instruction
1
Step1: assemble parts
dry-fit the parts to make sure they fit, and then reassemble with a dab of white glue in the joints.
Note that the angled wing root fillet is toward the front of the wing.
The plane should hang level from the eye, but if yo want it to rest on its landing gear, you'll need to add weight to the nose to simulate the weight of the engine forward.
Comments
