Report
Business Card Holder Box
InstructionBusinesscardbox
.xcs
Application scenario
Laser processing (10min)
Machine & module
xTool F1
2W, 10W
xTool F1 Ultra
20W
xTool D1 Pro
10W, 20W, 40W
xTool S1
2W, 10W, 20W, 40W
xTool P2
55W
xTool P2S
55WMaterial used
3mm Basswood Plywood
0.3mm Black Metal Business Card
0.33mm Cardstock Paper
191
858
Information
There are two templates, one for Metal Business Cards and Paper Business Cards. Perfect little boxes to hold your business cards! The cut file is for the D1 pro 20 watt if you use another machine you may have to adjust the settings. The engrave part is done on the F1 if you use the F1 ultra you will have to adjust the settings as well.
Instruction
1
Step1
All the settings for the machines including power, speed, passes, and line per cm is written on the canvas with links to materials. Cut on D1 sand wood before hand.
2
Step2
After cut on the D1 then assemble wood together. You can engrave something on the top of the wood if you wood like.
3
Step3
The purpale boxes or for the metal or paper cards just align them on the F1 and add cover art or any other info you have.
Comments
Remixes
xTool Supplies Used in This Template