Laser projects
Report

Chess set with pull out drawer for storage.

Instruction
chess.xcs
chess
.xcs
Application scenario
Laser processing
Machine & module
xTool M1
10W
Compatibles · 2
Material used
3mm Basswood Plywood
1/8" Gold Metallic Mesh Acrylic
1/8" Gold to Black Two-Tone Acrylic
3mm Black MDF board
3mm Birch Plywood
3mm Black Walnut Plywood
3mm Black Fire Retardant Acrylic
201
800
Information
      I built a beautiful chess set featuring pieces, and the board. This set also has something special. When you are done playing you can just put the chess pieces in a built in drawer for storage!
    
Instruction
1
Step1: Build it

First cut out the wood/acrylic

Now, glue together the checkered board, using the stencil.

Now, add the side pieces to the board as if they are the sides of a box. Use the taller, and bigger side pieces for this. Leave one of the longer pieces off to the side, and do not glue it on yet.

Now, build the drawer by connecting the 5 pieces. The drawer bottom, and all 4 sides. # sides will be small, One side will be the  bigger chessboard side piece from the last step.

Now build the chess pieces. This is pretty basic. they interlock.

Now put the drawer handle on the drawer.

Now put the drawer into the box under the chess board.

Now put on the bottom of the board.

You are done!

If you found this confusing, look at the photo. it explains almost everything.

Comments
Remixes
xTool Supplies Used in This Template
xTool M1
xTool M1
3mm Basswood Plywood
3mm Basswood Plywood
1/8" Gold Metallic Mesh Acrylic
1/8" Gold Metallic Mesh Acrylic
1/8" Gold to Black Two-Tone Acrylic
1/8" Gold to Black Two-Tone Acrylic
3mm Black MDF board
3mm Black MDF board
3mm Birch Plywood
3mm Birch Plywood
3mm Black Walnut Plywood
3mm Black Walnut Plywood
3mm Black Fire Retardant Acrylic
3mm Black Fire Retardant Acrylic