HomeTemplatesOffice & StationeryDesk Organization
Marks Hilltop Studio
Report
Laser cut and engrave Wooden memo pad holders with pencil and sticky notes
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave Wooden memo pad holders with pencil and sticky notes
Laser cut and engrave Wooden memo pad holders with pencil and sticky notes
Laser cut and engrave Wooden memo pad holders with pencil and sticky notes
Laser cut and engrave Wooden memo pad holders with pencil and sticky notes

Wooden sticky note pad holders / memo pad / Post it note

Instruction
Postitstands.xcs
Postitstands
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
20W
Compatibles · 10
Material used
3mm Basswood Plywood
30
338
Information
      Wooden sticky note holders with sayings on them so you can write things down that you forgot.
Instruction
1
Step1: Score, Cut, Complete
Preview
Preview

These Post it note stands are a great way to have your post it notes and a pencil handy and be easily seen.

To make these, simply cut them on plywood or another medium of your choice and attach post it notes with some double sided tape. I've added a picture of the tape that I use. These are great little dispensers.

You can change or adjust the words and anything else on this design as much as you like.

Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-SA