Report
![[Laser cut and engrave] Engraved wooden bookmark with green tassel and 'Lucky' text](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/3686ac52-18aa-44c5-97e6-7b28cb9555b0?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Wooden Bookmark Lucky
InstructionBookmarkLucky
.xcs
Application scenario
Laser processing (8min)
Machine & module
xTool M1
10WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
18
313
Information
Wooden Bookmark Lucky. Made with 3mm bassewood plywood in Xtool M1
Instruction
1
Step1: Design
Preview
Open the BookmarkLucky.xcs file in Xtool Creative and you will have the bookmark design.
2
Step2: Cutting Setting
Preview
The file is set for 3mm Basswood Plywood with Triangular Prism.
The cut layer is red and is set for Xtool M1 10W, you can change this option depending on the machine. You can also modify the parameters depending on the material as plywood, acrylic, leather, or any other material you have available
3
Step3: Engraving settings
Preview
You can modify the power or speed of the engraving to have a greater or lesser degree of engraving.
Comments
