Report
![[Laser cut and engrave] Basic business card](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/401a4591-ccda-4e74-9f78-7fa5917ca589?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Basic business card
InstructionBusinessCard_Basic
.xcs
Application scenario
Laser processing (15min)
Machine & module
xTool M1 Ultra
20WCompatibles · 12
Material used
1/125"(0.2mm) Black Metal Business Card
1/20"(1.3mm) Black to White Laser Engraving Two-Tone Plastic Sheet
564
2019
Information
Create a basic business card with your own details, either based on a "Black Metal Business Card" or some "Two-Tone Plastic Sheet Black to White".
You can check out additional variants for a...
... double sided business card with QR code: https://www.designfind.com/project/41466
... vertical business card design: https://www.designfind.com/project/41467
... single-sided business card with QR code: https://www.designfind.com/project/41468
Instruction
1
Step1: XCS file
Preview
Open the `.xcs` file in xTool Creative Space.
There is only one canvas which contains the business card.
In case you use different materials, please make sure to update the settings accordingly.
For example I did some testing using plywood and two toned plastic sheets. You might have to activate the cutout contours if you do so as well.
2
Step2: Customize details
All customizable content is on the “green” content layer. Please adapt to your own needs.
3
Step3: Laser engrave
Preview
Place your material in your machine and start the engraving process.
For batch processing individual business cards either XCS batch processing might be an option, alternatively a jig from plywood can make your work faster.
4
Step4: Finished product
Enjoy your cards. :)
Comments
