Report
![[Laser cut and engrave] Intricately designed wooden coasters with dragon engravings](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/3deb7238-9d5c-4e66-a82a-175182547412?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Intricately designed wooden coasters with dragon engravings
Instructiondragons
.xcs
Application scenario
Laser processing (150min)
Machine & module
xTool S1
40WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
118
537
Information
Love dragons and the combination and meaning of a dragon with a pearl - wealth, prosperity, wisdom and power! These are two different styles of dragon. You can just use one design or both depending on your likes. These are extra-large coasters so you can use them for pitchers, etc.
Instruction
1
Step1
Preview
Preview
Download the xcs file and look at the layout. If you want to change sizes, pick only one pattern you can add a canvas, copy and paste the one you want. Remember that the image also has an offset image that provides the cutting template.
Place the basswood on the bed and focus the laser (place the laser cross hairs on the board, press the ruler for the measure. Once that is done mark the processing area.
The settings are for 20 power, 150 speed and 240 lines/cm for engraving. Cutting is 100% power and 15 speed.
Given the details the engraving does take some time - 30 -45 minutes a coaster.
2
Step2: Remove and enjoy
Preview
Preview
Once you are done you can cover them with polyurethane or a clear matt enamel or keep them as they are.
Enjoy! Wishing you prosperity and wisdom!
Comments
Remixes
xTool Supplies Used in This Template
License
This work contains AI-generated content.