Report
Wooden Keychain - St. Patrick's Day Hat
InstructionKeyChainStPatricks2
.xcs
Application scenario
Laser processing (5min)
Machine & module
xTool M1
10WCompatibles · 10
Material used
3mm Basswood Plywood
32
561
Information
Wooden Keychain - St. Patrick's Day Hat. Made with 3mm bassewood plywood in Xtool M1
Instruction
1
Step1: Design
Preview
Open the KeyChainStPatricks2.xcs file in Xtool Creative and you will have the Keychain
2
Step2: Cutting Setting
Preview
The file is set for 3mm Basswood Plywood with Triangular Prism.
The cut layer is red and is set for Xtool M1 10W, you can change this option depending on the machine. You can also modify the parameters depending on the material as plywood, acrylic or any other material you have available
3
Step3: Engraving settings
Preview
You can modify the power or speed of the engraving to have a greater or lesser degree of engraving.
4
Step4: Place Stainless Steel Keyring
Add the Stainless Steel Keyring to the wood to finish the Keychain
Comments
Remixes
xTool Supplies Used in This Template