Chris Bloom
Report

Small Christmas Gnome Figurine

GnomeWithTree.xcs
GnomeWithTree
.xcs
Application scenario
Laser (1min)
Machine & module
xTool S1
20W
Material used
Poplar
1/8"(3mm) Basswood Plywood
12mm Poplar
3mm Basswood Plywood
342
2903

Information

      This little guy was created with 1/2" poplar wood and 3mm basswood plywood and all the cut shapes were painted separately and then glued onto the backing.
    
Comments

Remixes

xTool Supplies Used in This Template

xTool S1
xTool S1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
3mm Basswood Plywood