HomeTemplatesDecorKitchen Decor
woodstock1980
Report
Laser cut and engrave Handcrafted wooden coaster with intricate tree design
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave Handcrafted wooden coaster with intricate tree design
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave Handcrafted wooden coaster with intricate tree design
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave Handcrafted wooden coaster with intricate tree design
Laser cut and engrave Handcrafted wooden coaster with intricate tree design
Laser cut and engrave Handcrafted wooden coaster with intricate tree design
Laser cut and engrave Handcrafted wooden coaster with intricate tree design
Laser cut and engrave Handcrafted wooden coaster with intricate tree design
Laser cut and engrave Handcrafted wooden coaster with intricate tree design

Engraved wooden coasters with intricate patterns

Instruction
engravecherry.xcs
engravecherry
.xcs
Application scenario
Laser processing (40min)
Machine & module
xTool S1
10W
Material used
9mm cherry
53
419
Information
      I really like Celtic shapes, so with St. Patrick's Day coming I thought I would make some coasters. The cherry I cut was about 9mm which may have been too thick, not sure. 
So printed on S1 10w and I will cut each out on my bandsaw. 
You don't have to use cherry, I just wanted to experiment a little.
Instruction
1
Step1

Resawed slab of cherry down to 9mm, planed and sanded to prepare for laser. Worked on coaster design and created in XCS. Processed using these settings. 

Cherry wood not set up as a selection on my machine, so I used walnut wood and experimented with the settings. I used 100 power and 70 speed.

Sanded, sealed with Polyurethane and cut out circle on bandsaw (to avoid burning).  

 

Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1

License

CC BY