Report
![[Laser cut and engrave] Material Measuring device](https://image-res.xtool.com/resource/xtool%2Fcommunity%2Fmaking%2Fddd5ca5c-3582-48e4-91f3-02ceb897d4f8%2FIMG_0042.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Material Measuring device
InstructionMetricMatMeasure
.xcs
Application scenario
Laser (5min)
Machine & module
xTool P2
55WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
361
2600
Information
I got tired of having to attempt measuring the thickness of my material with a ruler so I created this measuring device!
Instruction
1
Step1: Design
Preview
Draw a rectangle that is the size of the tool then draw a rectangle from one edge ¾ of the way in at the thickness that you want. Then use the text tool to label the thickness with units.
2
Step2: Cut
Preview
Cut out the blue layer and score the green layer! Then remove from your machine. *You may need to do 2 cutpasses if it doesnt fully come out on the first pass.
3
Step3: Use
Preview
Now the tool is ready to be used! Simply slide the wood into the notch. It should go in but be a firm fit.
Comments